Сборник текстов на казахском, русском, английском языках для формирования навыков по видам речевой деятельности обучающихся уровней среднего образования



бет37/87
Дата28.01.2018
өлшемі18,66 Mb.
#34871
1   ...   33   34   35   36   37   38   39   40   ...   87

The law of conservation of mass.
The law of conservation of mass or principle of mass conservation states that for any system closed to all transfers of matter andenergy, the mass of the system must remain constant over time, as system mass cannot change quantity if it is not added or removed. Hence, the quantity of mass is "conserved" over time. The law implies that mass can neither be created nor destroyed, although it may be rearranged in space, or the entities associated with it may be changed in form, as for example when light or physical work is transformed into particles that contribute the same mass to the system as the light or work had contributed. The law implies (requires) that during anychemical reaction, nuclear reaction, or radioactive decay in an isolated system, the total mass of the reactants or starting materials must be equal to the mass of the products.
The concept of mass conservation is widely used in many fields such as chemistry, mechanics, and fluid dynamics. Historically, mass conservation was discovered in chemical reactions by Antoine Lavoisier in the late 18th century, and was of crucial importance in the progress from alchemy to the modern natural science of chemistry.
The closely related concept of matter conservation was found to hold good in chemistry to such high approximation that it failed only for the high energies treated by the later refinements of relativity theory, but otherwise remains useful and sufficiently accurate for most chemical calculations, even in modern practice.
In special relativity, needed for accuracy when large energy transfers between systems is involved, the difference between thermodynamically closed and isolated systems becomes important, since conservation of mass is strictly and perfectly

417


upheld only for so -called isolated systems, i.e. those completely isolated from all exchanges with the environment. In this circumstance, the mass–energy equivalence theorem states that mass conservation is equivalent to total energy conservation, which is the first law of thermodynamics. By contrast, for a thermodynamically closed system (i.e., one which is closed to exchanges of matter, but open to exchanges of non-material energy, such as heat and work, with the surroundings) mass is (usually) only approximately conserved. The input or output of non-material energy must change the mass of the system in relativity theory, although the change is usually small, since relatively large amounts of such energy (by comparison with ordinary experience) carry only a small amount of mass (again by ordinary standards of measurement).
In special relativity, mass is not converted to energy, since mass and energy cannot be destroyed, and energy in all of its forms always retains its equivalent amount of mass throughout any transformation to a different type of energy within a system (or translocation into or out of a system). Certain types of matter (a different concept) may be created or destroyed, but in all of these processes, the energy and mass associated with such matter remains unchanged in quantity (although type of energy associated with the matter may change form).
In general relativity, mass (and energy) conservation in expanding volumes of space is a complex concept, subject to different definitions, and neither mass nor energy is as strictly and simply conserved as is the case in special relativity and in Minkowski space. For a discussion, see mass in general relativity.
An important idea in ancient Greek philosophy was that "Nothing comes from nothing", so that what exists now has always existed: no new matter can come into existence where there was none before. An explicit statement of this, along with the further principle that nothing can pass away into nothing, is found in Empedocles (approx. 490–430 BC): "For it is impossible for anything to come to be from what is not, and it cannot be brought about or heard of that what is should be utterly destroyed."
A further principle of conservation was stated by Epicurus (341–270 BC) who, describing the nature of the Universe, wrote that "the totality of things was always such as it is now, and always will be".[5]
Jain philosophy, a non -creationist philosophy based on the teachings of Mahavira (6th century BC),[6] states that the universe and its constituents such as matter cannot be destroyed or created. The Jain text Tattvarthasutra (2nd century AD) states that a substance is permanent, but its modes are characterised by creation and destruction. A principle of the conservation of matter was also stated by Nasīr al-Dīn al -Tūsī (1201–1274). He wrote that "A body of matter cannot disappear completely. It only changes its form, condition, composition, color and other properties and turns into a different complex or elementary matter".
Mass conservation in chemistry[edit]

The principle of conservation of mass was first outlined by Mikhail Lomonosov (1711–1765) in 1748. He proved it by experiments—though this is sometimes challenged.[9]Antoine Lavoisier (1743–1794) had expressed these ideas in 1774. Others whose ideas pre-dated the work of Lavoisier include Joseph Black


418


(1728–1799), Henry Cavendish(1731–1810), and Jean Rey (1583–1645).
The conservation of mass was obscure for millennia because of the buoyancy effect of the Earth's atmosphere on the weight of gases. For example, a piece of wood weighs less after burning; this seemed to suggest that some of its mass disappears, or is transformed or lost. This was not disproved until careful experiments were performed in which chemical reactions such as rusting were allowed to take place in sealed glass ampoules; it was found that the chemical reaction did not change the weight of the sealed container and its contents. The vacuum pump also enabled the weighing of gases using scales.
Once understood, the conservation of mass was of great importance in progressing from alchemy to modern chemistry. Once early chemists realized that chemical substances never disappeared but were only transformed into other substances with the same weight, these scientists could for the first time embark on quantitative studies of the transformations of substances. The idea of mass conservation plus a surmise that certain "elemental substances" also could not be transformed into others by chemical reactions, in turn led to an understanding of chemical elements, as well as the idea that all chemical processes and transformations (such as burning and metabolic reactions) are reactions between invariant amounts or weights of these chemical elements.
Following the pioneering work of Lavoisier the prolonged and exhaustive experiments of Jean Stas supported the strict accuracy of this law in chemical reactions, even though they were carried out with other intentions. His research indicated that in certain reactions the loss or gain could not have been more than from 2 to 4 parts in 100,000. The difference in the accuracy aimed at and attained by Lavoisier on the one hand, and by Morley and Stas on the other, is enormous.

Generalization


In special relativity, the conservation of mass does not apply if the system is open and energy escapes. However, it does continue to apply to totally closed (isolated) systems. If energy cannot escape a system, its mass cannot decrease. In relativity theory, so long as any type of energy is retained within a system, this energy exhibits mass.

Also, mass must be differentiated from matter (see below), since matter may not be perfectly conserved in isolated systems, even though mass is always conserved in such systems. However, matter is so nearly conserved in chemistry that violations of matter conservation were not measured until the nuclear age, and the assumption of matter conservation remains an important practical concept in most systems in chemistry and other studies that do not involve the high energies typical of radioactivity and nuclear reactions.


The mass associated with chemical amounts of energy is too small to measure The change in mass of certain kinds of open systems where atoms or massive
particles are not allowed to escape, but other types of energy (such as light or heat) are allowed to enter or escape, went unnoticed during the 19th century, because the change in mass associated with addition or loss of small quantities of thermal or radiant energy in chemical reactions is very small. (In theory, mass would not change at all for experiments conducted in isolated systems where heat and work were not

419


allowed in or out.)
The theoretical association of all energy with mass was made by Albert Einstein in 1905. However Max Planck pointed out that the change in mass of systems as a result of extraction or addition of chemical energy, as predicted by Einstein's theory, is so small that it could not be measured with available instruments, for example as a test of Einstein's theory. Einstein speculated that the energies associated with newly discovered radioactivity were significant enough, compared with the mass of systems producing them, to enable their mass-change to be measured, once the energy of the reaction had been removed from the system. This later indeed proved to be possible, although it was eventually to be the first artificial nuclear transmutation reaction in 1932, demonstrated by Cockcroft and Walton, that proved the first successful test of Einstein's theory regarding mass-loss with energy-loss.

Mass conservation remains correct if energy is not lost

The conservation of relativistic mass implies the viewpoint of a single observer (or the view from a single inertial frame) since changing inertial frames may result in a change of the total energy (relativistic energy) for systems, and this quantity determines the relativistic mass.
The principle that the mass of a system of particles must be equal to the sum of their rest masses, even though true in classical physics, may be false in special relativity. The reason that rest masses cannot be simply added is that this does not take into account other forms of energy, such as kinetic and potential energy, and massless particles such as photons, all of which may (or may not) affect the total mass of systems.

For moving massive particles in a system, examining the rest masses of the various particles also amounts to introducing many different inertial observation frames (which is prohibited if total system energy and momentum are to be conserved), and also when in the rest frame of one particle, this procedure ignores the momenta of other particles, which affect the system mass if the other particles are in motion in this frame.

For the special type of mass called invariant mass, changing the inertial frame of observation for a whole closed system has no effect on the measure of invariant mass of the system, which remains both conserved and invariant (unchanging), even for different observers who view the entire system. Invariant mass is a system combination of energy and momentum, which is invariant for any observer, because in any inertial frame, the energies and momenta of the various particles always add to the same quantity (the momentum may be negative, so the addition amounts to a subtraction). The invariant mass is the relativistic mass of the system when viewed in the center of momentum frame. It is the minimum mass which a system may exhibit, as viewed from all possible inertial frames.
The conservation of both relativistic and invariant mass applies even to systems of particles created by pair production, where energy for new particles may come from kinetic energy of other particles, or from one or more photons as part of a system that includes other particles besides a photon. Again, neither the relativistic nor the invariant mass of totally closed (that is, isolated) systems changes when new

420


particles are created. However, different inertial observers will disagree on the value of this conserved mass, if it is the relativistic mass (i.e., relativistic mass is conserved by not invariant). However, all observers agree on the value of the conserved mass if the mass being measured is the invariant mass (i.e., invariant mass is both conserved and invariant).
The mass-energy equivalence formula gives a different prediction in non-isolated systems, since if energy is allowed to escape a system, both relativistic mass and invariant mass will escape also. In this case, the mass-energy equivalence formula predicts that the change in mass of a system is associated
with the change in its energy due to energy being added or subtracted: This form involving changes was the form in which this famous equation was originally presented by Einstein. In this sense, mass changes in any system are explained simply if the mass of the energy added or removed from the system, are taken into account.
The formula implies that bound systems have an invariant mass (rest mass for the system) less than the sum of their parts, if the binding energy has been allowed to escape the system after the system has been bound. This may happen by converting system potential energy into some other kind of active energy, such as kinetic energy or photons, which easily escape a bound system. The difference in system masses, called a mass defect, is a measure of the binding energy in bound systems – in other words, the energy needed to break the system apart. The greater the mass defect, the larger the binding energy. The binding energy (which itself has mass) must be released (as light or heat) when the parts combine to form the bound system, and this is the reason the mass of the bound system decreases when the energy leaves the system. The total invariant mass is actually conserved, when the mass of the binding energy that has escaped, is taken into account.

Exceptions or caveats to mass/matter conservation Matter is not perfectly conserved


The principle of matter conservation may be considered as an approximate physical law that is true only in the classical sense, without consideration of special relativity andquantum mechanics. It is approximately true except in certain high energy applications.

A particular difficulty with the idea of conservation of "matter" is that "matter" is not a well-defined word scientifically, and when particles that are considered to be "matter" (such as electrons and positrons) are annihilated to make photons (which are often not considered matter) then conservation of matter does not take place over time, even within isolated systems. However, matter is conserved to such an extent that matter conservation may be safely assumed in chemical reactions and all situations in which radioactivityand nuclear reactions are not involved.


Even when matter is not conserved, the collection of mass and energy within the system are conserved.

Open systems and thermodynamically closed systems


Mass is also not generally conserved in open systems. Such is the case when various forms of energy are allowed into, or out of, the system (see for example,

421


binding energy). However, again unless radioactivity or nuclear reactions are involved, the amount of energy escaping such systems as heat, work, or electromagnetic radiation is usually too small to be measured as a decrease in system mass.
The law of mass conservation for isolated systems (totally closed to all mass and energy), as viewed over time from any single inertial frame, continues to be true in modern physics. The reason for this is that relativistic equations show that even "massless" particles such as photons still add mass and energy to isolated systems, allowing mass (though not matter) to be strictly conserved in all processes where energy does not escape the system. In relativity, different observers may disagree as to the particular value of the conserved mass of a given system, but each observer will agree that this value does not change over time as long as the system is isolated (totally closed to everything).
General relativity

In general relativity, the total invariant mass of photons in an expanding volume of space will decrease, due to the red shift of such an expansion (see Mass in general relativity). The conservation of both mass and energy therefore depends on various corrections made to energy in the theory, due to the changing gravitational potential energy of such systems. [8]


Reactivity Series
All metals show certain physical & chemical properties like malleability, ductility and a lustrous surface. Almost all metals release hydrogen gas with dilute acids. But the reactivity of metals towards various reactants is not the same. Some metals like alkali & alkaline earth metals (group-1 & 2) are very reactive & react vigorously with a reactant. But some metals like gold & platinum are least reactive and passive for almost all reactants. Some metals like copper release hydrogen gas with dilute acid. Hence, there must be some criteria for understanding the reactivity of different metals and predicting the products of different reactions.
Reactivity Series of Metals

Back to Top


Elements are mainly classified under metals & non-metals. There are some elements, which have intermediate features. They are known as metalloids.

Differences between metals & non-metals.



422

S.No

Metal

Non-metal

1

Malleable & ductile in nature

Brittle in nature

2

Good conductor of heat & electricityInsulator in nature

3

Form ionic compounds

Form Covalent compounds

4

Have lustre surface

Not applicable

5

Have high melting point

Low melting point compare to metals

6

Usually solid at room temperature

Can exist in solid , liquid & gaseous state

7

They are good reducing agent

Good oxidizing agent

8

Form basic oxides

Form acidic oxides

9

Have low electronegativity

High electronegativity

10

Have a tendency to lose electrons

Have a tendency to gain electrons


Almost all metals are reactive and react vigorously with various compounds. In the whole periodic table, more than 75% elements are metallic in nature.


The reactivity series or activity series is an empirical arrangement of metals, in order of "reactivity" from highest to lowest. In other words, the most reactive metal is presented at the top and the least reactive metal at the bottom.

Metal

Symbol

Reactivity

Lithium

Li




Potassium

K




Strontium

Sr




Calcium

Ca




Sodium

Na




Magnesium

Mg




Aluminum

Al




Zinc

Zn




Chromium

Cr




Iron

Fe




Cadmium

Cd




Cobalt

Co




Nickel

Ni




Tin

Sn




Lead

Pb




Hydrogen gas

H2




Antimony

Sb




Arsenic

Ar




Bismuth

Bi




Copper

Cu




Mercury

Hg






423


Silver Ag

Hence potassium is the most reactive metal and platinum the least reactive one. In the whole series, only two non-metals are included, which are carbon & hydrogen. Carbon helps in predicting the products formed during the extraction of iron in blast furnace and hydrogen is included because non-metals below it will not react with dilute acids.


In the reactivity series, as we move from bottom to top, the reactivity of metals increases. Metals present at the top of the series can lose electrons more readily to form positive ions and corrode or tarnish more readily. They require more energy to be separated from their ores, and become stronger reducing agents, while metals present at the bottom of the series are good oxidizing agent.
By using the reactivity series, one can predict the products of displacement reaction. Each element in the reactivity series can be replaced from a compound by any of the elements above it. For example, magnesium metal can displace zinc ions in a solution.


Достарыңызбен бөлісу:
1   ...   33   34   35   36   37   38   39   40   ...   87




©engime.org 2024
әкімшілігінің қараңыз

    Басты бет