Литература
Cannon, B.L., Hoburg, J.F., Stancil, D.D. and Goldstein, S.C. (2009) Magnetic resonant coupling as a potential
means for wireless power transfer to multiple small receivers. IEEE Transactions on Power Electronics, 24, 1819–
1825.
Chan, C.C. and Chau, K.T. (2001) Modern Electric Vehicle Technology, OxФорд University Press, OxФорд.
Chau, K.T. (2009) Electric motor drives for battery, hybrid and fuel cell vehicles, in Electric Vehicles:
Technology, Research and Development (ed G.B. Raines), Nova Science, New York, pp. 1–40.
Chau, K.T. (2010) Hybrid vehicles, in Alternative Fuels for Transportation (ed A.S. Ramadhas), CRC Press,
Boca Raton, FL, pp. 361–391.
Chau, K.T. (2012) Research on electric vehicles: challenges, opportunities and emerging technologies. Studies
in Science and Technology, 1, 13–24.
Chau, K.T. (2014) Pure electric vehicles, in Alternative Fuels and Advanced Vehicle Technologies for
Improved Environmental Performance (ed R. Folkson), Woodhead Publishing, Amsterdam, pp. 655–684.
Chau, K.T. and Chan, C.C. (2007) Emerging energy-efficient technologies for hybrid electric vehicles.
Proceedings of the IEEE, 95, 821–835.
Chau, K.T., Chan, C.C. and Liu, C. (2008) Overview of permanent-magnet brushless drives for electric and
hybrid electric vehicles. IEEE Transactions on Industrial Electronics, 55, 2246–2257.
Chau, K.T. and Wang, Z. (2011) Chaos in Electric Drive Systems–Analysis, Control and Application, Wiley-
IEEE Press, Singapore.
Chau, K.T. and Wong, Y.S. (2001) Hybridization of energy sources in electric vehicles. Energy Conversion and
Management, 42, 1059–1069.
Chau, K.T. and Wong, Y.S. (2002) Overview of power management in hybrid electric vehicles. Energy
Conversion and Management, 43, 1953–1968.
Chau, K.T., Wong, Y.S. and Chan, C.C. (1999) An overview of energy sources for electric vehicles. Energy
Conversion and Management, 40, 1021–1039.
Christensen, J., Albertus, P., Sanchez-Carrera, R.S. et al. (2012) A critical review of Li/air batteries. Journal of
the Electro- chemical Society, 159, R1–R30.
Du, Y., Chau, K.T., Cheng, M. et al. (2011) Design and analysis of linear stator permanent magnet vernier
machines. IEEE Transactions on Magnetics, 47, 4219–4222.
Du, C. and Pan, N. (2006) Supercapacitors using carbon nanotubes films by electrophoretic deposition. Journal
of Power Sources, 160, 1487–1494.
Ehsani, M., Falahi, M. and Lotfifard, S. (2012) Vehicle to grid services: potential and applications. Energies, 5,
4076–4090.
Gao, S., Chau, K.T., Chan, C.C. et al. (2011) Optimal control framework and scheme for integrating plug-in
hybrid electric vehicles into grid. Journal of Asian Electric Vehicles, 9, 1473–1481.
Gao, S., Chau, K.T., Liu, C. et al. (2014) Integrated energy management of plug-in electric vehicles in power
grid with renewables. IEEE Transactions on Vehicular Technology, 63, 3019–3027.
Gao, S., Chau, K.T., Liu, C. et al. (2012) SMES control for power grid integrating renewable generation and
electric vehicles. IEEE Transactions on Applied Superconductivity, 22, 5701804-1–5701804-4.
Giuliano, M.R., Advani, S.G. and Prasad, A.K. (2011) Thermal analysis and management of lithium-titanate
batteries. Journal of Power Sources, 196, 6517–6524.
18
Guille, C. and Gross, G. (2009) A conceptual framework for the vehicle-to-grid (V2G) implementation. Energy
Policy, 37, 4379–4390.
Hermance, D. and Sasaki, S. (1998) Hybrid electric vehicles take to the streets. IEEE Spectrum, 35, 48–52.
Hoeijmakers, M. and Ferreira, J. (2006) The electric variable transmission. IEEE Transactions on Industry
Applications, 42, 1092–1100.
Imura, T. and Hori, Y. (2011) Maximizing air gap and efficiency of magnetic resonant coupling for wireless
power transfer using equivalent circuit and Neumann formula. IEEE Transactions on Industrial Electronics, 58,
4746–4752.
Jian, L. and Chau, K.T. (2009) A novel electronic-continuously variable transmission propulsion system using
coaxial mag- netic gearing for hybrid electric vehicles. Journal of Asian Electric Vehicles, 7, 1291–1296.
Jian, L. and Chau, K.T. (2010) Design and analysis of a magnetic-geared electronic-continuously variable
transmission system using finite element method. Progress in Electromagnetics Research, 107, 47–61.
Kamiya, M. (2006) Development of traction drive motors for the Тойота hybrid system. IEEE Transactions on
Industry Applications, 126, 473–479.
Kesler, M., Kisacikoglu, M.C. and Tolbert, L.M. (2014) Vehicle-to-grid reactive power operation using plug-in
electric vehicle bidirectional off-board charger. IEEE Transactions on Industrial Electronics, 61, 6778–6784.
Kim, J., Kim, J., Kong, S. et al. (2013) Coil design and shielding methods for a magnetic resonant wireless
power transfer system. Proceedings of the IEEE, 101, 1332–1342.
Kisacikoglu, M.C., Ozpineci, B., and Tolbert, L.M. (2010) Examination of a PHEV bidirectional charger for
V2G reactive power compensation. Proceedings of IEEE Applied Power Electronics Conference and Exposition,
pp. 458–465.
Lee, C.H. (1963) Vernier motor and its design. Proceedings of IEEE Winter General Meeting, pp. 343–349.
Lee, C.H.T., Liu, C. and Chau, K.T. (2014) A magnetless axial-flux machine for range-extended electric
vehicle. Energies,
7, 1483–1499.
Li, J., Chau, K.T. and Li, W. (2011) Harmonic analysis and comparison of permanent magnet vernier and
magnetic-geared machines. IEEE Transactions on Magnetics, 47, 3649–3652.
Liu, C., Chau, K.T. and Jiang, J.Z. (2010a) A permanent-magnet hybrid brushless integrated starter-generator
for hybrid electric vehicles. IEEE Transactions on Industrial Electronics, 57, 4055–4064.
Liu, C., Yu, Z., Neff, D. et al. (2010b) Graphene-based supercapacitor with an ultrahigh energy density. Nano
Letters, 10, 4863–4868.
Liu, C., Chau, K.T., Jiang, J.Z. and Niu, S. (2008) Comparison of stator-permanent-magnet brushless machines.
IEEE Trans- actions on Magnetics, 44, 4405–4408.
Liu, C., Chau, K.T., Wu, D. and Gao, S. (2013) Opportunities and challenges of vehicle-to-home, vehicle-to-
vehicle, and vehicle-to-grid technologies. Proceedings of the IEEE, 101, 2409–2427.
Martin, S., Garcia-Ybarra, P.L. and Castillo, J.L. (2010) Electrospray deposition of catalyst layers with ultra-
low Pt loadings for PEM fuel cells cathodes. Journal of Power Sources, 195, 2443–2449.
Musavi, F. and Eberle, W. (2014) Overview of wireless power transfer technologies for electric vehicle battery
charging. IET Power Electronics, 7, 60–66.
Omar, N., Daowd, M., Hegazy, O. et al. (2012) Standardization work for BEV and HEV applications: critical
appraisal of recent traction battery documents. Energies, 5, 138–156.
Qiu, C., Chau, K.T., Ching, T.W. and Liu, C. (2014a) Overview of wireless charging technologies for electric
vehicles. Journal of Asian Electric Vehicles, 12, 1–7.
Qiu, C., Chau, K.T., Liu, C. et al. (2014b) Quantitative comparison of dynamic flux distribution of magnetic
couplers for roadway electric vehicle wireless charging system. Journal of Applied Physics, 115, 17A334-1–
17A334-3.
Spooner, E. and Haydock, L. (2003) Vernier hybrid machines. IEE Proceedings – Electric Power Applications,
150, 655–662. Strasik, M., Johnson, P.E., Day, A.C. et al. (2007) Design, fabrication, and test of a 5-kWh/100-kW
flywheel energy storage utilizing a high-temperature superconducting bearing. IEEE Transactions on Applied
Superconductivity, 17, 2133–2137. Taibi, S., Tounzi, A. and Piriou, F. (2006) Study of a stator current excited
vernier reluctance machine. IEEE Transactions on Energy Conversion, 21, 823–831.
Theodoridis, M.P. (2012) Effective capacitive power transfer. IEEE Transactions on Power Electronics, 27,
4906–4913. Wakefield, E.H. (1994) History of the Electric Automobile: Battery-Only Powered Cars, Society of
Automotive Engineers, Warrendale, PA.
Wang, Z. and Chau, K.T. (2009) Design, analysis, and experimentation of chaotic permanent magnet DC motor
drives for electric compaction. IEEE Transactions on Circuits and Systems II, 56, 245–249.
Wang, J., Chau, K.T., Jiang, J.Z. and Yu, C. (2008) Design and analysis of a transverse flux permanent magnet
19
machine using three dimensional scalar magnetic potential finite element method. Journal of Applied Physics, 103,
7F107-1–7F107-3.
Wang, X., Ma, Y., Li, S. et al. (2011) Ceria-based nanocomposite with simultaneous proton and oxygen ion
conductivity for low-temperature solid oxide fuel cells. Journal of Power Sources, 196, 2754–2758.
Wu, D., Chau, K.T. and Gao, S. (2010a) Cost-emission analysis of vehicle-to-grid system. World Electric
Vehicle Journal, 4, 767–773.
Wu, D., Chau, K.T., and Gao, S. (2010b) Multilayer framework for vehicle-to-grid operation. Proceedings of
IEEE Vehicle Power and Propulsion Conference, pp. 1–6.
Ye, S. and Chau, K.T. (2007) Chaoization of DC motors for industrial mixing. IEEE Transactions on Industrial
Electronics, 54, 2024–2032.
Yu, C. and Chau, K.T. (2009) Thermoelectric automotive waste heat energy recovery using maximum power
point tracking. Energy Conversion and Management, 50, 1506–1512.
Zhang, S.S. (2013) Liquid electrolyte lithium/sulfur battery: fundamental chemistry, problems, and solutions.
Journal of Power Sources, 231, 153–162.
Zhang, X. and Chau, K.T. (2011a) Design and implementation of a new thermoelectric-photovoltaic hybrid
energy system for hybrid electric vehicles. Electric Power Components and Systems, 39, 511–525.
Zhang, X. and Chau, K.T. (2011b) An automotive thermoelectric-photovoltaic hybrid energy system using
maximum power point tracking. Energy Conversion and Management, 52, 641–647.
Zhang, Z., Chau, K.T., Liu, C. et al. (2014) An efficient wireless power transfer system with security
considerations for electric vehicle applications. Journal of Applied Physics, 115, 17A328-1–17A328-3.
Zhang, Z., Chau, K.T., Wang, Z. and Li, W. (2011) Improvement of electromagnetic compatibility of motor
drives using hybrid chaotic pulse width modulation. IEEE Transactions on Magnetics, 47, 4018–4021.
Zhu, Z.Q. and Howe, D. (2007) Electrical machines and drives for electric, hybrid and fuel cell vehicles.
ProceedingsoftheIEEE, 95, 746–765.
|